+38 (066) 354-00-04 Mon–Fri 9:00–18:00 75 Zhylianska St, Kyiv, Ukraine

Herbas HKSD tobacco dryer

Herbas HKSD prefabricated chamber dryer for tobacco: 72–150 frames, 700–1,500 kg of dry leaf per cycle. Heat generator on gas, liquid fuel, biomass or firewood.

Price and configuration
Calculated for your area and conditions
Delivery
Within Ukraine and abroad, with customs clearance
Start-up and service
On-site commissioning and staff training

Description and specifications

Description

The HKSD is a prefabricated chamber dryer from the Croatian manufacturer Herbas for tobacco, above all the Virginia type. It can also dry other field crops: maize, wheat, peppers. The dryer works in batches.

Tobacco leaf is dried on standard 400 × 1,500 mm frames. Depending on its size, the chamber takes from 72 to 150 frames, or 700–1,500 kg of dry leaf per drying cycle.

Construction

  • Frame: galvanised steel tubes.
  • Walls and roof: 50 mm insulating panels with polyurethane foam.
  • Floor: 1.5 mm perforated galvanised sheet.
  • Doors: two- or three-leaf, sized for tobacco frames.

The dryer is quick to erect. When it stands in the open, the chamber is extended by a 2 m canopy that protects the heat generator from the weather.

Heating and fuel

The air is heated by a Herbas heat generator: the gas or liquid-fuel HT-90 or HTG-160, the firewood HT-RD, or the HT-AD with automatic feeding of wood chips or pellets. The output is matched to the chamber capacity and the fuel.

Specification

Typeprefabricated chamber dryer, batch loading
Material driedtobacco, and also maize, wheat, peppers
Capacity72, 106, 120 or 150 frames of 400 × 1,500 mm
Dry leaf per cycle700–1,500 kg
Walls and roof50 mm insulating panels
Fuelgas, liquid fuel, biomass, pellets, firewood

Similar machinery

Catalog
Machinery for herbs and fibre crops →
Tobacco Herbas tobacco processing equipment
Processing and lines · Herbas

Herbas tobacco processing equipment

Herbas (Croatia) designs and builds equipment for handling tobacco after harvest and curing: PMD processing lines, leaf inspection lines, lines for receiving tobacco in C-48 cases and for processing stems, and…

Price on request
Hemp and flax Herbas RSD/H-250 stalk cutter for hemp and tobacco
Harvesting · Herbas

Herbas RSD/H-250 stalk cutter for hemp and tobacco

The RSD/H-250 is a mounted machine from the Croatian manufacturer Herbas that cuts the plant stalk at ground level and saws a slot in it in a single pass. The plant is then hung by this slot on a wire or rope to dry…

Price on request
Cereals Herbas RSP 600 / RSP 900 rotary drum dryer
Drying · Herbas

Herbas RSP 600 / RSP 900 rotary drum dryer

The RSP 600 and RSP 900 are rotary drum dryers from the Croatian manufacturer Herbas. They work continuously: material is fed in at one end of the drum and leaves dry at the other. The machine does not have to stop for…

Price on request
Herbs and greens Herbas KSP 22 condensation dryer
Drying · Herbas

Herbas KSP 22 condensation dryer

The KSP 22 is a containerised dryer from the Croatian manufacturer Herbas for medicinal and aromatic herbs. It does not blow moisture out with hot air but condenses it on the evaporator of a refrigeration unit. Drying…

Price on request
Request

Request a price for this machine

Describe your task — we will select the machinery and calculate the price and delivery time.

+38 (066) 354-00-04 Mon–Fri 9:00–18:00

By submitting the form you agree to the privacy policy.