Herbas tobacco lines: PMD processing at 500–1,500 kg/h, leaf inspection, C-48 case reception, stem processing, a slicer, a redryer up to 7 t/h and a press.
Herbas (Croatia) designs and builds equipment for handling tobacco after harvest and curing: PMD processing lines, leaf inspection lines, lines for receiving tobacco in C-48 cases and for processing stems, and individual machines: a slicer, a redryer and a press.
The range
Equipment
Purpose
Capacity
PMD lines
tobacco processing
500–1,500 kg/h of cut tobacco
Inspection line
picking out off-grade leaf
1.5–10 t of tobacco at the infeed
C-48 case reception line
inspection, grading, sorting by class
650–800 cases in 8 h
Fines and stem line
processing tobacco stems and fines
10,000 kg/h at the infeed
SL-H/02 slicer
cutting a bale into layers
on request
Redryer
thermal treatment of tobacco
up to 7 t/h
Press
final pressing of tobacco in C-48 cases
on request
Manufacturer’s video: tobacco processing line
Inspection line
The line consists of distributors, vibrating sieves and several conveyor lanes. Cascades in the middle of the inspection conveyor make the leaf fall and turn over, so the workers see both sides. The same tobacco is checked by several people on one line, so, according to the manufacturer, fewer staff are needed and the risk of missing off-grade leaf is lower.
C-48 case reception line
Cases are placed on the line by a forklift or a manipulator; grading and reclassification take place in the flow.
After classification a manipulator automatically stacks the cases three high, ready for the warehouse.
The line includes at least seven conveyors, scales, strapping machines and manipulators.
Stem and fines processing
The line is rated for an infeed of up to 10,000 kg/h and works to CORESTA methods. It is fully automated from infeed to outfeed, apart from the section where the C-48 cases are formed.
SL-H/02 slicer
It cuts a bale of tobacco or herbs measuring 1,100 × 700 × 750 mm into a set number of layers. It consists of a weighing conveyor on load cells, a feed conveyor, a holding system, a cutting unit and an inclined take-away conveyor.
Redryer
It carries out the thermal treatment of tobacco. The leaf passes through the zones on a slat conveyor of perforated AISI 304 sheet: five drying zones bring the moisture down to 8–10%, followed by cooling and reconditioning to about 12.5%. The housing is built of insulating panels; temperature and moisture sensors hold the set values.
Maximum capacity
7 t of tobacco per hour
Heat source
steam at 6 bar
Moisture after drying
8–10%
Moisture at the outlet
about 12.5%
Material
AISI 304 stainless steel, optionally combined with carbon steel
Case press
It gives tobacco in C-48 cases a final pressing after weighing. To keep the case from splitting, the press has a self-closing guide form.
The RSD/H-250 is a mounted machine from the Croatian manufacturer Herbas that cuts the plant stalk at ground level and saws a slot in it in a single pass. The plant is then hung by this slot on a wire or rope to dry…
The HKSD is a prefabricated chamber dryer from the Croatian manufacturer Herbas for tobacco, above all the Virginia type. It can also dry other field crops: maize, wheat, peppers. The dryer works in batches.
Herbas (Croatia) lines process dried chamomile: they separate the flower heads from the stem, grade them into class 1 and class 2, clean them of impurities and turn the stem into pulvis, a fine fraction for tea and…
Herbas (Croatia) builds complete lines for dried medicinal and aromatic herbs and for rose hips. A line strips the leaf from the stem, cuts the material to the required fraction, removes stones, metal and dust, and bags…
Price on requestDetails →
Request
Request a price for this machine
Describe your task — we will select the machinery and calculate the price and delivery time.