The KSP 22 is a containerised dryer from the Croatian manufacturer Herbas for medicinal and aromatic herbs. It does not blow moisture out with hot air but condenses it on the evaporator of a refrigeration unit. Drying therefore takes place at 20–30 °C in a closed loop, with no outside air mixed in.
The dryer is built into a 40′ HC container and travels in one piece. The site needs only a level base and a three-phase supply: no gas and no boiler house.
Why dry at a low temperature
Industrial hemp, mint, lemon balm, lavender and sage are valued for their essential oils. Above 30 °C the losses of volatile substances become noticeable. According to the manufacturer, at 20–30 °C colour, aroma, flavour and heat-sensitive compounds such as terpenes are preserved better than in warm-air drying. And because the chamber air does not mix with outside air, the material is not contaminated.
The price of a low temperature is time: moisture leaves the plant more slowly, so a cycle takes 30–48 hours.
Manufacturer’s video: Herbas containerised condensation dryer
How the dryer works
A fan at the rear of the container drives air through the layer of moist material.
The moist air is cooled on the evaporator of the larger refrigeration unit, the vapour condenses and the water is piped outside.
Part of the air passes through the condenser of the same unit and is reheated before returning to the chamber.
A second, smaller unit removes surplus heat so that the chamber temperature does not rise. No outside air enters the chamber.
A digital controller on the side wall of the container runs the process. Temperature and humidity sensors can be placed around the chamber and the curves followed remotely while the regime is tuned to the material.
Loading: on the floor or on shelves
On the perforated floor. Hemp tops are loaded in a layer of up to 1.7 m, dense materials that pack down in a layer of 40–50 cm. A moving floor that makes loading and unloading easier is available as an option.
On shelves with a permeable base, in several tiers. Wheeled shelves are placed by a forklift or rolled in by hand on a trolley.
In both cases the material is spread evenly and loosely so that it dries uniformly throughout.
Specification
Type
condensation (heat pump), batch loading
Housing
40′ HC container with insulating panels
Effective drying area
20 m²
Drying temperature
20–30 °C, full air recirculation
Electrical power
9.2 kW
Power supply
three-phase
Dimensions (L × W × H)
12,455 × 2,440 × 2,895 mm
Noise level
50–60 dB
Drying time
30–48 h
Load and drying time for industrial hemp:
Material
Load, t per batch
Drying time, h
Hemp tops
1.5–2
36–60
Hemp flowers
1–1.5
36–48
For other crops the batch size depends on the material and the layer height; we calculate it for your raw material.
Why a container
No building is needed for the dryer, and it can be moved closer to the field. Herb plots are often scattered, and freshly cut material has to reach the dryer quickly, before it begins to ferment.
The RSP 600 and RSP 900 are rotary drum dryers from the Croatian manufacturer Herbas. They work continuously: material is fed in at one end of the drum and leaves dry at the other. The machine does not have to stop for…
The HKSD is a prefabricated chamber dryer from the Croatian manufacturer Herbas for tobacco, above all the Virginia type. It can also dry other field crops: maize, wheat, peppers. The dryer works in batches.
The HRS 1000-2 is a chamber dryer from the Croatian manufacturer Herbas in which the material dries on trolley shelves. It is designed for fresh plant material, fruit and vegetables and forms part of Herbas lines for…