ICS heat generators are hot-air generators from the Austrian maker ICS Energietechnik. They burn wood chips, bark and other biomass and deliver clean heated air to a grain dryer or another industrial dryer. Output goes up to 15 MW: such a unit supplies up to 1,000,000 m³ of air per hour or heats it to 700 °C.
What sets them apart
- Heat exchanger: only clean air reaches the product. Flue gases are cleaned and leave separately through the stack.
- Forced-draught fans create a slight positive pressure at the dryer inlet.
- Heavy industrial design: built for year-round duty over decades, not for two months of the season.
- They connect to dryers of different types. The easiest match is a machine with a centrifugal fan and a pressure sensor in the hot-air chamber, such as Alvan Blanch conveyor dryers and Scolari dryers.
What is dried
- cereals and oilseeds: maize, soya, sunflower, rapeseed;
- sugar beet, pumpkin seeds, fruit;
- herbs: alfalfa, chamomile, aromatic and medicinal plants;
- wood chips and sawdust for pellets, bark;
- sludge, sewage sludge, digestate;
- waste for RDF fuel, sand, plastic and rubber waste.
HLE model range
| Model | Output, MW | Hot air flow, m³/h | Chip consumption at 35% moisture, kg/h |
|---|
| HLE 1000 | 1 | 30.000 | 362 |
| HLE 1500 | 1.5 | 45.000 | 543 |
| HLE 2000 | 2 | 60.000 | 724 |
| HLE 3000 | 3 | 90.000 | 1.086 |
| HLE 4000 | 4 | 120.000 | 1.447 |
| HLE 5000 | 5 | 150.000 | 1.810 |
| HLE 6000 | 6 | 180.000 | 2.172 |
| Custom-built | 6–15 | up to 1,000,000 | up to 5,500 |
Hot air temperature in the standard range is 100–200 °C. Units up to 6 MW are standard models, while 6 to 15 MW units are designed for the site: with large systems every plant has its own conditions.
Fuel
- wood chips;
- sawdust and wood waste;
- bark;
- corn cobs;
- pellets;
- other fuels by agreement.
The heat generator is designed for chips from freshly felled wood at 50–55% moisture. Rated output is given for 50% moisture; with wetter chips the actual output will be lower. Dry chips have a higher heating value, so timber is stored before chipping where possible.
Tell us what you dry, which dryer you have and how much air it uses, and what fuel is available nearby — we will calculate the output and select a model.