+38 (066) 354-00-04 Mon–Fri 9:00–18:00 75 Zhylianska St, Kyiv, Ukraine

Modular biomass micro CHP plants

Modular micro CHP plants from 35 kW to 1 MW of electrical output: ORC, steam engines and gasifiers. Electricity and heat from biomass or from process waste heat.

Price and configuration
Calculated for your area and conditions
Delivery
Within Ukraine and abroad, with customs clearance
Start-up and service
On-site commissioning and staff training

Description and specifications

Description

Micro CHP plants are cogeneration units with an electrical output from 35 kW to 1 MW: they produce electricity and heat at the same time. The units are modular or containerised, so capacity is added in modules of 50 or 100 kW. Their heat comes from a biomass boiler or from waste heat of the process itself — exhaust steam, hot water, flue gases.

Three technologies

  • Organic Rankine cycle (ORC). The same principle as a steam turbine, but with an organic fluid with a low boiling point instead of water. The unit therefore also runs on low-temperature sources: residual steam, hot water, flue gases. ORC modules are usually 30–200 kW and are combined in groups.
  • Steam engines. They convert steam energy into mechanical and then electrical energy. Their share of electricity is higher than a turbine’s, so they suit sites with few heat consumers.
  • Gasifiers. Solid fuel is turned into syngas, which is burnt in a reciprocating generator set. The share of electricity is also higher — an option for those who do not need much heat.

Which technology fits depends on how much electricity and heat the site needs, what fuel is available and whether there is waste heat that is currently lost.

Where they are used

  • wood processing: sawmills, furniture factories, plywood production;
  • pulp, paper and board mills;
  • pelleting: fuel pellets, compound feed, alfalfa, fertiliser — the presses need steam;
  • oil extraction plants;
  • dairies, breweries, meat plants: sterilisation, pasteurisation, steaming;
  • greenhouses;
  • district heating networks;
  • drying plants with a year-round load.

For a grain dryer that runs two or three months a year, cogeneration is usually not a fit: the unit needs a steady load. For grain drying there are biomass heat generators and hot water boilers.

Tell us how much electricity and heat you need and what fuel or waste heat is available on site — we will select the technology and the number of modules.

Similar machinery

Catalog
Heat generators, boilers and CHP units →
Gas and diesel generator sets
Heating, energy and biofuel

Gas and diesel generator sets

We supply gas generator sets up to 4.5 MW and diesel sets up to 21.6 MW, as well as cogeneration and trigeneration units based on them. Where more power is needed, several machines are combined into one plant. Gas…

Price on request
ICS biomass mini CHP plants
Heating, energy and biofuel · ICS

ICS biomass mini CHP plants

Mini CHP plants from the Austrian maker ICS Energietechnik generate electricity and heat at the same time from biomass — wood chips, bark, corn cobs, husk. The boiler produces steam at up to 35 bar and 500 °C, which…

Price on request
Herbas heat generators for dryers: HT-90, HTG-160, HT-RD, HT-AD
Heating, energy and biofuel · Herbas

Herbas heat generators for dryers: HT-90, HTG-160, HT-RD, HT-AD

Herbas (Croatia) floor-standing heat generators heat the air for dryers. The generator usually stands in the end bay of the dryer, and its fan blows the heated air into the chamber. The same models are used to heat…

Price on request
ICS biomass hot-air generators for dryers
Heating, energy and biofuel · ICS

ICS biomass hot-air generators for dryers

ICS heat generators are hot-air generators from the Austrian maker ICS Energietechnik. They burn wood chips, bark and other biomass and deliver clean heated air to a grain dryer or another industrial dryer. Output goes…

Price on request
Request

Request a price for this machine

Describe your task — we will select the machinery and calculate the price and delivery time.

+38 (066) 354-00-04 Mon–Fri 9:00–18:00

By submitting the form you agree to the privacy policy.