ES series dryers from the Italian company Scolari are intended for products that have to be dried for a very long time at a very low temperature, 35–40 °C. These are above all nuts, chestnuts, pine cones and similar large material.
How it works
The product slides very slowly down the inclined bed under its own weight. Warm air enters from below, passes through the layer and carries the moisture away. Part of the air is taken off at the top and returned to the fan, which cuts fuel consumption considerably.
Construction
- Modular design: each module is 0.7 to 1.5 m wide, depending on the size of the product and how freely air passes through it.
- Control by an electromechanical panel or by a PLC with software for fully automatic operation.
- No foundation is needed: the dryer stands on ordinary slabs.
- It is usually installed in the open, under a simple canopy or in a well-ventilated building.
Any heat source can be used: natural gas or LPG, steam, thermal oil, hot water, or solid fuel (wood chips, pellets, straw, firewood).
For small batches of the same products, Scolari C series cabinet dryers are suitable, and for continuous nut drying the Alvan Blanch NDF. Tell us the product and the volume, and we will suggest a type and size.