Herbas mini dryers
Besides container and stationary dryers, Herbas (Croatia) builds mini dryers for small farms and processors that need to dry small volumes of herbs, grain, seeds and nuts.

Herbas HKS-HC dryer in a 40′ HC container: 22 m² floor for grain, seeds, nuts, herbs and rose hips. Heat generator on biomass, gas or liquid fuel.
The HKS-HC is a portable dryer from the Croatian manufacturer Herbas, built into a 40′ HC shipping container. It travels to the harvest site on an ordinary lorry and is lifted off by a 9 t loader. The site needs only a level surface and a power supply. The dryer is certified as a machine, not as a building. Drying is in batches.
Floor segments with special perforation are fitted for small seeds such as rapeseed and hemp.
The body is insulated with 50 mm polyurethane panels. At the front is a double door wide enough for a front or telescopic loader; at the rear, a door to the heat generator bay. The floor is made of segments of 1.5 mm perforated galvanised sheet with Ø 3.2 mm holes. The working size of the chamber is 10,000 × 2,230 × 2,700 mm, or about 22 m² of floor. Hot air is blown up through the floor and the layer of material.
The standard floor is fixed. A moving floor is an option: material is fed in at the entrance, a leveller sets the layer height and the floor carries it into the chamber. Unloading is by running the floor in reverse. The operator does not need to enter the chamber and, according to the manufacturer, one or two people can run the dryer. The moving floor also makes cleaning easier.
The second option is a mixer, which evens out drying through the depth of the layer. With a paddle mixer and a moving floor the dryer suits pumpkin seeds, rose hips, grape pomace and malt.
| Material | Layer height | Volume | Weight | Drying time |
|---|---|---|---|---|
| Maize, cereals | up to 50 cm | 11 m³ | 7 t | 8–10 h |
| Pumpkin seeds | up to 30 cm | 6.5 m³ | 4 t | 12 h |
| Chamomile | 40–60 cm | 9–13 m³ | 2–3 t | 20–24 h |
The time depends on the initial moisture, the evenness of the layer, the weather and the drying programme. Industrial hemp is loaded in a layer of up to 1.7 m.
The dryer is supplied with a biomass heat generator with automatic fuel feeding: nut shells, plum, apricot and peach stones, G20 wood chips, wood pellets, chopped branches, straw pellets. When drying nuts, their own shells can be the fuel. Heat generators on liquid fuel and natural gas are also available. Temperature and humidity are controlled automatically from sensor readings.
Dry material can be sent straight into big bags by auger; a set consisting of a receiving hopper and a wheeled screw conveyor is available for this.
Besides container and stationary dryers, Herbas (Croatia) builds mini dryers for small farms and processors that need to dry small volumes of herbs, grain, seeds and nuts.
The HKS (model HKS-12/60) is a stationary chamber dryer from the Croatian manufacturer Herbas. The material lies on a perforated floor and hot air passes up through it. Drying is in batches. Unlike the mobile HKS-HC in…
The line from the Croatian manufacturer Herbas processes grape pomace, the residue left after pressing the juice. It splits the pomace into skins, stalks and seeds, dries the seeds and part of the skins, and presses the…
DX are triple-pass drum dryers from the Italian company RP Engineering. They dry wood chips, sawdust, shavings, wood waste and other biomass of medium and fine fraction, including very wet material, ahead of pelleting…
Describe your task — we will select the machinery and calculate the price and delivery time.
+38 (066) 354-00-04 Mon–Fri 9:00–18:00