+38 (066) 354-00-04 Mon–Fri 9:00–18:00 75 Zhylianska St, Kyiv, Ukraine

Herbas equipment for pumpkin seed oil production

Herbas pumpkin seed oil line: 2,000 kg/h seed washer, polisher, mill, conditioner, gas roaster, hydraulic press and press cake crusher.

Price and configuration
Calculated for your area and conditions
Delivery
Within Ukraine and abroad, with customs clearance
Start-up and service
On-site commissioning and staff training

Description and specifications

Description

Herbas (Croatia) makes machines for the whole pumpkin seed oil chain, from harvesting the seeds in the field to pressing the oil and crushing the press cake. Each machine covers one stage, and together they form a line.

Stages and machines

StageMachineKey data
WashingHPBK-50/2702,000 kg/h, 0.92 kW, 480 kg
PolishingPSB-25×56500–800 kg of dry seeds per hour
MillingHM-400Pair cleaning of heavy and light impurities
ConditioningKU-100120 l, AISI 304 stainless steel
Heat treatmentAHK60-2150 l bowl, load up to 50 l, gas
PressingHP-300-2 (HOH-A160)portions of 1–2 l between discs
Cake crushingHDP-28up to 400 kg/h, pieces of 1–3 cm

The seeds are harvested with the HKV-70 and dried between washing and polishing. A 40′ HC container dryer suits this: a layer of up to 30 cm, about 6.5 m³ or 4 t of seeds, roughly 12 hours.

HPBK-50/270 seed washer

It is placed straight after harvest. A dosing auger feeds the seeds into an inclined rotating drum of perforated sheet, where pressurised water jets wash off the slime and remaining flesh. A brush keeps the perforation clear, and at the outlet a turbo fan removes light impurities and surface moisture. Grape seeds are washed on the same machine. Dimensions: 4,568 × 924 × 1,507 mm; material: carbon steel or AISI 304.

PSB-25×56 polisher

It works with seeds that are already dry: it cleans them of impurities and gives the surface a shine, and air separation at the outlet removes light particles. Dimensions: 3,140 × 710 × 2,120 mm.

Manufacturer’s video: polishing pumpkin seeds

HM-400P mill and KU-100 conditioner

The mill grinds the seeds and at the same time uses an air stream to separate stones, metal, flakes and chaff. The most heavily loaded rotor parts are made of hard alloy. In the KU-100 conditioner the milled mass is mixed with water and salt by a paddle shaft.

AHK60-2 gas roaster

Heating breaks down the cell structure and releases the oil. The 150 l bowl (load up to 50 l) is heated by atmospheric gas burners, and electrically driven stirrers mix the mass. Working and limit thermostats hold the temperature, and the body is insulated.

Hydraulic press

The hot mass is loaded into a perforated cylinder in portions of 1–2 l separated by round discs so that the pressure is spread evenly. Pressing is controlled from the cabinet or by hand with hydraulic valves. An HHP cold-pressing screw press can follow the hydraulic press in the line.

HDP-28 cake crusher

The cake is very dense after pressing. The HDP-28 breaks it into 1–3 cm pieces that are convenient for milling; crushed cake is used in the food industry and in livestock feed. The wearing surfaces are hardfaced.

Similar machinery

Catalog
Pumpkin machinery →
Pumpkins and melons Herbas HKV-70 pumpkin seed harvester
Harvesting · Herbas

Herbas HKV-70 pumpkin seed harvester

The HKV-70 is a trailed harvester from the Croatian manufacturer Herbas for pumpkins grown for seed. In one pass it picks up pumpkins laid in windrows, breaks them and separates the seeds from the rest of the fruit in…

Price on request
Pumpkins and melons TR 1000 pumpkin seed harvester with manual feed
Harvesting

TR 1000 pumpkin seed harvester with manual feed

TR 1000 pumpkin seed harvester with manual feed. B2B selection of a solution for your task: configuration, logistics, commissioning and service — on request.

Price on request
Pumpkins and melons TR 1100 pumpkin seed harvester with manual feed
Harvesting

TR 1100 pumpkin seed harvester with manual feed

TR 1100 pumpkin seed harvester with manual feed. B2B selection of a solution for your task: configuration, logistics, commissioning and service — on request.

Price on request
Request

Request a price for this machine

Describe your task — we will select the machinery and calculate the price and delivery time.

+38 (066) 354-00-04 Mon–Fri 9:00–18:00

By submitting the form you agree to the privacy policy.