+38 (066) 354-00-04 Mon–Fri 9:00–18:00 75 Zhylianska St, Kyiv, Ukraine

Herbas separators and sieves for herbs and chamomile

Herbas SEP/DK separators, the RGK-H 600 flower head separator, REB rubbing machines, HPS and CFS air separators, VS and RS sieves. From 70 to 5,000 kg/h.

Price and configuration
Calculated for your area and conditions
Delivery
Within Ukraine and abroad, with customs clearance
Start-up and service
On-site commissioning and staff training

Description and specifications

Description

Herbas (Croatia) machines divide plant material into fractions by size, weight and type of particle. The range covers separators for fresh and dried chamomile, machines that strip the leaf from the stem, air separators, sieves and an inspection conveyor.

Where each machine is used

  • Fresh chamomile before drying: the SEP/DK cylindrical separator removes long stems so that surplus material is not dried.
  • Chamomile flowers: the RGK-H 600 separator cuts off the head with about 16 mm of stalk.
  • Leaf and stem: the REB 100 and REB 200 rubbing machines and the thresher.
  • Separation by weight: the HPS 630 and CFS 800 air separators divide leaf from stem and product from stones, metal and dust.
  • Sizing: VS vibrating sieves and the RS 150 planetary sieve, two to five fractions.
  • Visual inspection: the inspection conveyor.

Models and specifications

ModelPurposeCapacityPowerWeight
SEP/DK-4000, SEP/DK-3000dividing fresh chamomile into two fractions5,000 kg/h of fresh material0.75–1.6 kW550 kg
RGK-H 600separating chamomile flower heads70–100 kg/h0.67 kW280 kg
REB 100separating leaf from stem500 kg/h1.5 kW250 kg
REB 200separating leaf from stemup to 1,000 kg/h1.5 kW550 kg
Thresherseparating leaf from stem and petiolesup to 1,000 kg/h1.5 kW500 kg
HPS 630air separation into two fractions500–1,000 kg/h4.5 kW450 kg
CFS 800air separation into two fractions2,000 kg/h16 kW1,500 kg
RS 150sizing into 2–5 fractions300 kg/h1.5 kW900 kg

Capacity depends on the material and the settings.

SEP/DK cylindrical separator

A drum 3,000 or 4,000 mm long divides freshly picked chamomile into two fractions: flowers with stems of up to 50 mm, and longer stems with impurities. The cut point is set by the sieve openings on the drum. Long stems do not reach the dryer, so, according to the manufacturer, drying costs fall.

The sieve openings can be cleaned automatically, and the separator stands on braked wheels. It is also used to clean dried tobacco and herbs of dust and to separate grape seeds from skins. It is made in stainless or structural steel.

RGK-H 600 chamomile flower head separator

Two rollers with round holes turn at the bottom of the hopper, and moving knives cut off the long stems. A string vibrating sieve under the rollers screens out herb, petals and pulvis. The gap between knives and roller is adjustable, so the head is cut cleanly and precisely. One machine gives 70–100 kg/h; several are placed in a row for larger volumes. Material: AISI 304 or carbon steel.

Manufacturer’s video: chamomile flower head separator

REB 100 and REB 200 rubbing machines

The material enters a conical half-round sieve, where rotating polyamide brushes strip the leaf blade from the stem and reduce it to the mesh size. The stem leaves separately. Interchangeable sieves with another mesh are supplied to order. The machine comes with a 1,500 mm working platform with railings and a ladder.

Manufacturer’s video: rubbing and separating mint

Thresher

It separates the leaf from the stem, petioles and midrib while keeping the leaf fraction as coarse as possible. The material is best fed by a dosing conveyor, which gives an even flow. Capacity is up to 1,000 kg/h.

HPS 630 and CFS 800 air separators

The HPS 630 (630 mm channel) cleans chamomile flowers of soil, stones and metal. A vibrating conveyor feeds the material to a vertical air channel: the light fraction rises with the air stream and settles in a cyclone, while the heavy fraction falls into a drawer or onto a conveyor. The machine is installed only as part of a line and also suits seed cleaning.

The CFS 800 (800 mm channel) is rated at 2,000 kg/h. A fan with frequency control lifts the light fraction and delivers it to a vibrating sieve, and the heavy fraction goes to a built-in conveyor. Settings are entered at the operator panel. Typical jobs are removing stems and ribs from sage, mint and tobacco leaf, and dedusting.

VS vibrating sieves

One to three decks divide the material into 2–4 fractions. The screens are AISI 304 mesh or perforated sheet, with the mesh size to order. The decks can be cleaned by rubber balls; amplitude, frequency and throw angle are adjustable.

TypeWidthLengthDecks
VS 6600 mm1,400–2,250 mm1 or 2
VS 9900 mm2,350–3,000 mm1, 2 or 3
VS 121,200 mm3,000–4,000 mm1, 2 or 3

RS 150 planetary sieve

The sieve moves in three dimensions, so the boundary between neighbouring fractions is sharp even with fine particles. One to four interchangeable sieves give 2–5 fractions. Herbas builds planetary sieves 1,000–2,100 mm in diameter; the housing is fully enclosed and, according to the manufacturer, releases no dust.

Inspection conveyor

An operator inspects the product on a moving belt: chamomile, peppers, cucumbers, carrots. The belt is white, food grade, to FDA standard; the frame is carbon or stainless steel. Height adjustment is an option.

Similar machinery

Catalog
Machinery for herbs and fibre crops →
Hemp and flax F-2000 square baler for hemp
Harvesting

F-2000 square baler for hemp

F-2000 square baler for hemp. B2B selection of a solution for your task: configuration, logistics, commissioning and service — on request.

Price on request
Hemp and flax ZIB-2.4 flax harvester
Harvesting

ZIB-2.4 flax harvester

ZIB-2.4 flax harvester. B2B selection of a solution for your task: configuration, logistics, commissioning and service — on request.

Price on request
Hemp and flax S-1.5 mini flax harvester
Harvesting

S-1.5 mini flax harvester

S-1.5 mini flax harvester. B2B selection of a solution for your task: configuration, logistics, commissioning and service — on request.

Price on request
Hemp and flax Mobile decorticator for processing hemp or flax
Processing and lines

Mobile decorticator for processing hemp or flax

A mobile decorticator separates fibre from the shives in industrial hemp and flax stalks right on the farm. Configuration and price on request.

Price on request
Request

Request a price for this machine

Describe your task — we will select the machinery and calculate the price and delivery time.

+38 (066) 354-00-04 Mon–Fri 9:00–18:00

By submitting the form you agree to the privacy policy.