+38 (066) 354-00-04 Mon–Fri 9:00–18:00 75 Zhylianska St, Kyiv, Ukraine

Herbas cutters and mills for herbs

Herbas RB, RBG and URH knife cutters and MB, HM, HUM and MNV mills for fresh and dried herbs, fruit and seeds. From 10 to 5,000 kg/h.

Price and configuration
Calculated for your area and conditions
Delivery
Within Ukraine and abroad, with customs clearance
Start-up and service
On-site commissioning and staff training

Description and specifications

Description

Herbas (Croatia) makes a full range of machines for reducing plant material: knife cutters for fresh and dried herbs, and mills for dry material, fruit and seeds. Each machine can be supplied on its own or built into a processing line.

Which machine to choose

  • Fresh herbs before drying: the RB-200 and RB-400 cutters, up to 2,000 and up to 5,000 kg/h.
  • Dried material: the same RB-200 and RB-400, the compact RBG-200, or the URH 50-6 cutter with interchangeable sieves, which prepares loose tea from a 3 mm fraction upwards.
  • Milling dry material: the MB-100 mill (also in the CF version with an air separator) and the HM series mills. The fraction is set by the mill sieve.
  • Very fine milling: the HUM-30 pulveriser with carbon dioxide cooling.
  • Crushing fruit and seeds: the MNV-450 roller mill.

Models and specifications

ModelMaterialCapacityPowerWeight
RB-200fresh and driedup to 2,000 kg/h fresh, up to 200 kg/h dried1.35–2.5 kW250 kg
RB-400fresh and driedup to 5,000 kg/h fresh, up to 500 kg/h dried4.37 kW600 kg
RBG-200fresh and dried50 kg/h dried0.55 kW90 kg
URH 50-6dried50–300 kg/h1.5 kW200 kg
MB-100, MB-100 CFdried, infeed up to 30 mm180 kg/h9.5 kW240 kg
HM 815dried1,000 kg/h22 kW950 kg
HM 600driedup to 600 kg/h11 kW400 kg
HM 500dried300–500 kg/h11 kW320 kg
HUM-30dried, fine milling10–20 kg/hon requeston request

Actual capacity depends on the material and the fraction size.

RB-200 and RB-400 cutters

Both machines cut herbs fresh or dried. A dosing belt (200 mm on the RB-200, 400 mm on the RB-400) feeds the material to the knife rotor. The cut length is set by the ratio of belt speed to knife speed; the minimum on the RB-200 is 3–5 mm.

The RB-200 rotor cuts in two directions, after which the material passes a built-in sieve. The RB-400 has a large feed hopper for green material. A chute or a screw conveyor is fitted at the outlet. The machines are made in structural or stainless steel.

Manufacturer’s video: cutting fresh medicinal herbs on the RB-400

RBG-200 compact cutter

A guillotine cutter for small producers. The cut length is set by the feed step of the 200 mm belt, from under 1 mm to 20 mm. Capacity is 50 kg/h of dried material and power is 0.55 kW.

URH 50-6 cutter with interchangeable sieves

It prepares dried material for milling or for packing as loose tea. The rotor knives work against counter-knives on the stator and cut the material to a length equal to the sieve opening. The fraction is changed by changing the sieve; three AISI 304 stainless steel sieves are included, with perforation to order. Parts in contact with the product can also be made of AISI 304 on request.

MB-100 mill and the MB-100 CF version

The MB-100 mills dried plant material with particles of up to 30 mm. The fineness is set by interchangeable sieves, three of which come as standard. The mill is made of carbon or stainless steel.

The MB-100 CF is the same mill with pneumatic conveying, a cyclone and a rotary valve or a product container. Air flowing through the sieve keeps it clean and carries off particles of the right size at once, so, according to the manufacturer, product losses in milling are noticeably lower.

HM series mills

  • HM 815: 1,000 kg/h, 22 kW. The drum is 850 mm wide and the sieve is cleaned by the air stream.
  • HM 600: up to 600 kg/h, 11 kW. Horizontal hammer rotor, noise enclosure, fan, cyclone and rotary valve included; the air is recirculated.
  • HM 500: 300–500 kg/h, 11 kW. The mill also acts as the fan for pneumatic conveying; a magnetic metal separator is fitted ahead of it.

HM mills usually work in a closed loop with RS series planetary sieves: the coarse fraction returns for regrinding.

HUM-30 pulveriser

Designed for fine milling of medicinal herbs. Such milling produces a lot of dust, so carbon dioxide is injected into the housing through nozzles: it cools the material and protects against ignition. A thermostat controls the CO2 supply. According to the manufacturer, the system meets ATEX requirements. Capacity is 10–20 kg/h.

MNV-450 roller mill

Two toothed rollers with an adjustable gap crush pumpkin seeds, rose hips and similar material. The rollers have a wear-resistant CrNiMn hardfacing. The housing is carbon steel or, to order, stainless steel.

Similar machinery

Catalog
Machinery for herbs and fibre crops →
Hemp and flax F-2000 square baler for hemp
Harvesting

F-2000 square baler for hemp

F-2000 square baler for hemp. B2B selection of a solution for your task: configuration, logistics, commissioning and service — on request.

Price on request
Hemp and flax ZIB-2.4 flax harvester
Harvesting

ZIB-2.4 flax harvester

ZIB-2.4 flax harvester. B2B selection of a solution for your task: configuration, logistics, commissioning and service — on request.

Price on request
Hemp and flax S-1.5 mini flax harvester
Harvesting

S-1.5 mini flax harvester

S-1.5 mini flax harvester. B2B selection of a solution for your task: configuration, logistics, commissioning and service — on request.

Price on request
Hemp and flax Mobile decorticator for processing hemp or flax
Processing and lines

Mobile decorticator for processing hemp or flax

A mobile decorticator separates fibre from the shives in industrial hemp and flax stalks right on the farm. Configuration and price on request.

Price on request
Request

Request a price for this machine

Describe your task — we will select the machinery and calculate the price and delivery time.

+38 (066) 354-00-04 Mon–Fri 9:00–18:00

By submitting the form you agree to the privacy policy.