+38 (066) 354-00-04 Mon–Fri 9:00–18:00 75 Zhylianska St, Kyiv, Ukraine

Herbas HHP, HP-300 and HP-20 presses for oil and macerates

Herbas HHP cold-pressing screw presses, 5–40 kg/h, for seeds, kernels and nuts, and HP-300 and HP-20 hydraulic presses for oil and macerates.

Price and configuration
Calculated for your area and conditions
Delivery
Within Ukraine and abroad, with customs clearance
Start-up and service
On-site commissioning and staff training

Description and specifications

Description

Herbas (Croatia) makes three types of press. The HHP models are continuous screw presses for cold-pressing oil from seeds, kernels and nuts. The HP-300 is a vertical hydraulic press for hot-pressing oil and cold-pressing macerate. The HP-20 is a compact hydraulic press for macerates and small batches.

HHP screw presses

The presses extract oil from oilseeds of varying hardness, nuts and fruit kernels. There are three outputs: unrefined oil, oil sediment and press cake. The S models have a more powerful drive and take a wider range of raw materials.

ModelInput, kg/hDriveHeaterDimensions, mmWeight
HHP 205–201.5 kW600 W878 × 559 × 79666 kg
HHP 20 S5–202.2 kW600 W877 × 559 × 80678 kg
HHP 4010–402.2 kW800 W1,012 × 559 × 82495 kg
HHP 40 S10–404 kW800 W1,124 × 559 × 844118 kg

Which raw materials suit which model

  • All four models: unhulled sunflower, linseed, poppy, milk thistle, mustard, sesame, chia, rapeseed, walnut, hazelnut, almond, apricot and plum kernels, peanut.
  • All except the HHP 40: black and white grape seeds, mulberry seeds, hull-less pumpkin seeds, hulled sunflower.
  • S models only: pomegranate, hemp, raspberry, blackberry and strawberry seeds, black cumin, coconut flour.
  • HHP 20 S only: rose hip seeds.

One of three screws is fitted to suit the material: with a shallow, standard or deep channel. The standard and deep screws are used for nuts, kernels and peanuts, the shallow one for small berry seeds, and all three suit rapeseed. A frequency inverter controls the speed and a thermostat holds the head temperature. On grape seeds the HHP 40 S processes up to 30 kg/h.

HP-300 hydraulic press

It is built on a strong frame with the working cylinder at the top and a cylinder for ejecting the cake at the bottom. The piston enters a perforated steel basket and presses the mass. Control is manual, by lever, or semi-automatic to a pressing programme. The press is anchored to a reinforced concrete base, and the hydraulic power pack stands separately.

The HP-300-2 version is intended for heated milled pumpkin seed mass, and also for macadamia and similar materials.

Typevertical hydraulic press
Purposehot-pressing oil, cold-pressing macerate
Dimensions (W × D × H)976 × 872 × 2,702 mm
Working height1,250 mm

HP-20 macerate press

A compact vertical press for macerated herbs and plant material, for producers of extracts and tinctures. The force is 5 t (50 kN) at 65 bar. The pump has a single-phase motor, so the press runs from an ordinary single-phase supply.

  • The 20 l perforated stainless steel cylinder slides out for loading and unloading.
  • The piston is controlled by a joystick, and a gauge shows the pressure.
  • An interlock stops the piston from descending if the cylinder is not in place.
Manufacturer’s video: HP-20 hydraulic press

Similar machinery

Catalog
Machinery for herbs and fibre crops →
Hemp and flax F-2000 square baler for hemp
Harvesting

F-2000 square baler for hemp

F-2000 square baler for hemp. B2B selection of a solution for your task: configuration, logistics, commissioning and service — on request.

Price on request
Hemp and flax F-2000 round baler for hemp
Harvesting

F-2000 round baler for hemp

F-2000 round baler for hemp. B2B selection of a solution for your task: configuration, logistics, commissioning and service — on request.

Price on request
Hemp and flax ZIB-2.4 flax harvester
Harvesting

ZIB-2.4 flax harvester

ZIB-2.4 flax harvester. B2B selection of a solution for your task: configuration, logistics, commissioning and service — on request.

Price on request
Hemp and flax S-1.5 mini flax harvester
Harvesting

S-1.5 mini flax harvester

S-1.5 mini flax harvester. B2B selection of a solution for your task: configuration, logistics, commissioning and service — on request.

Price on request
Request

Request a price for this machine

Describe your task — we will select the machinery and calculate the price and delivery time.

+38 (066) 354-00-04 Mon–Fri 9:00–18:00

By submitting the form you agree to the privacy policy.