F-2000 square baler for hemp
F-2000 square baler for hemp. B2B selection of a solution for your task: configuration, logistics, commissioning and service — on request.

Herbas equipment: washers for root crops, fruit and olive leaf, mixers from 100 l to 6 m³, packing, CO2 chambers and steam pasteurisation.
This Herbas (Croatia) equipment covers the operations before and after the main processing: washing root crops, fruit and olive leaf, stripping olive leaves from branches, mixing, packing and decontamination by carbon dioxide disinfestation and steam pasteurisation.
| Machine | Purpose | Key data |
|---|---|---|
| HPBK-C150 | washing celeriac | nylon brushes and water spray; water recirculation optional |
| Bubble washer | washing fruit and vegetables | water bath with air bubbles, modular belt; batch or continuous |
| HPL-05 | washing olive leaf, removing twigs | AISI 304 stainless steel |
| SSL-M/60 | stripping leaves from olive branches | rotor with PVC strings |
| MB-80 | mixing a batch | volume from 100 l to 6 m³ |
| HERBAPAK-R1 | packing into bags | ±2%, 200–500 bags/h |
| High-pressure CO2 chamber | disinfestation | about 20 m³, about 12 bar, about 12 h |
| Low-pressure CO2 chamber | disinfestation | about 22 m³, 0.2 bar, about 72 h |
| Vacuum pasteurisation chamber | reducing bacterial load | vacuum from 80%, usually 70–80 °C, layer up to 80 mm |
A belt conveyor feeds olive branches to a rotor with PVC strings under a transparent guard. According to the manufacturer, the machine removes more than 90% of the leaves in the first pass. Drying the branches to about 10% moisture beforehand is recommended. The leaf is then washed, dried, cut and packed; Herbas supplies the whole chain of machines.
The drum mixer evens out the composition of a batch made of different components and fractions: herbal teas, spice blends, chamomile pulvis, seed with a carrier for sowing. There are five volumes: 100 l, 300 l, 1 m³, 3 m³ and 6 m³. The small models are meant for small producers and laboratories, the largest for evening out batch quality in production.
On models from 300 l, loading and unloading go through a central diverter valve, switched by a lever and by reversing the rotation. A full cycle for herbal blends usually takes 45–60 minutes, of which mixing itself takes 15–30 minutes. The drum is washed with a pressure washer; cleaning in place (CIP) and a frequency inverter are options.
A semi-automatic machine that weighs loose material and fills it into bags to within ±2%. It consists of a hopper, a vibrating dosing tray, a load cell, a control cabinet and a start pedal. The scale tares itself automatically after every weighing. Output is 200–500 bags an hour.
The high-pressure chamber is a horizontal vessel 1,900 mm in diameter and 10,000 mm long, about 20 m³, taking 12 Euro pallets per cycle. At about 12 bar the gas passes through the packaging and kills insects, eggs and larvae in about 12 hours. Chambers are installed in pairs: after a cycle about half of the CO2 is transferred to the neighbouring chamber. The door opens only once the monitoring system shows a safe gas concentration.
The low-pressure chamber has a volume of about 22 m³ and works at 0.2 bar; a cycle takes about 72 hours and the load is up to 12 pallets. Dimensions: 10,700 × 2,385 mm, height from 3,165 mm. The settings can be controlled remotely.
It reduces the bacterial load of herbs to the permitted level. The material, in permeable sacks in a layer of up to 80 mm, is laid out on trolley shelves. A vacuum pump removes the air (80–90%), then dry steam is admitted and quickly heats the layer to 70–80 °C (94 °C at most). After the holding time the pressure is equalised with air drawn through a HEPA filter.
F-2000 square baler for hemp. B2B selection of a solution for your task: configuration, logistics, commissioning and service — on request.
ZIB-2.4 flax harvester. B2B selection of a solution for your task: configuration, logistics, commissioning and service — on request.
S-1.5 mini flax harvester. B2B selection of a solution for your task: configuration, logistics, commissioning and service — on request.
A mobile decorticator separates fibre from the shives in industrial hemp and flax stalks right on the farm. Configuration and price on request.
Describe your task — we will select the machinery and calculate the price and delivery time.
+38 (066) 354-00-04 Mon–Fri 9:00–18:00