+38 (066) 354-00-04 Mon–Fri 9:00–18:00 75 Zhylianska St, Kyiv, Ukraine

Herbas KVH-2000 chamomile harvester

Herbas KVH-2000 trailed harvester for chamomile, mint, lemon balm, nettle and thyme. Working width 1,850 mm, tractor from 30 kW, up to 0.4 ha/h.

Price and configuration
Calculated for your area and conditions
Delivery
Within Ukraine and abroad, with customs clearance
Start-up and service
On-site commissioning and staff training

Description and specifications

Description

The KVH-2000 is a trailed harvester from the Croatian manufacturer Herbas for picking chamomile flowers. It is attached to the tractor’s three-point linkage, and all the working parts are driven by hydraulic motors and cylinders from the tractor’s hydraulics. Besides chamomile it harvests mint, lemon balm, mallow and nettle, and the EHT version also works in thyme.

Two versions

  • KVH-2000 EH has a 2.7 m³ tipping hopper. Only the tractor and harvester enter the field; the hopper fills in roughly one pass along the field and is then tipped into a trailer.
  • KVH-2000 EHT has a telescopic belt conveyor. A tractor and trailer run alongside, so harvesting and transfer go on at the same time, with no stops. On the road the conveyor is folded and turned to the rear.

In the working position the harvester runs behind and to one side of the tractor, so the tractor hardly tramples the crop. The drawbar, drives, hopper and conveyor are operated from the cab with a simple control box.

Output

The working speed in chamomile is about 3 km/h. In theory that is 0.6 ha/h, but with headland turns and unloading the real figures are:

FigureKVH-2000 EHKVH-2000 EHT
Real field output0.25–0.33 ha/h0.3–0.4 ha/h
In 3 hours of work0.75–1 ha0.9–1.2 ha
Per season: 10 days of 9 hoursup to 30 haup to 39 ha

The seasonal figures assume a well-organised harvest: the picking period is stretched by spring topping and staggered sowing dates.

Tractor requirements

  • Power from 30 kW (41 hp).
  • Four hydraulic outlets for the standard version.
  • The cutter bar drive needs about 10 kW of hydraulic power, the conveyor drive up to 1 kW.
  • The standard hitch is category 2 (tractors of 30–75 kW); category 1 or 3 to order.

The harvester has been tested with a John Deere 5620 (58.2 kW, 200 bar, 56 l/min) and a Zetor 7341 Super Turbo (53.7 kW, 179 bar, 53 l/min).

Setting up

Harvest quality depends on forward speed, reel speed and height. The fewer weeds, soil and lower plant parts in the hopper, the cheaper the drying and processing. The height is changed from the cab with the linkage hydraulics, from ground level to about 720–820 mm. For chamomile only the tops of the plants are taken.

For mint, nettle and mallow the harvester is fitted with a mower lowered to 80–150 mm, and the plants are cut whole. On uneven fields the cutter bar is not lowered below 150 mm.

Manufacturer’s video: trailed chamomile harvester

Specification

ParameterKVH-2000 EHKVH-2000 EHT
Unloading2.7 m³ tipping hoppertelescopic belt conveyor
Working width1,850 mm1,850 mm
Tractorfrom 30 kW, 4 hydraulic outletsfrom 30 kW, 4 hydraulic outlets
Reel drivehydraulic motorhydraulic motor
Weight1,600 kg2,000 kg

Similar machinery

Catalog
Machinery for herbs and fibre crops →
Hemp and flax ZIB-2.4 flax harvester
Harvesting

ZIB-2.4 flax harvester

ZIB-2.4 flax harvester. B2B selection of a solution for your task: configuration, logistics, commissioning and service — on request.

Price on request
Hemp and flax S-1.5 mini flax harvester
Harvesting

S-1.5 mini flax harvester

S-1.5 mini flax harvester. B2B selection of a solution for your task: configuration, logistics, commissioning and service — on request.

Price on request
Request

Request a price for this machine

Describe your task — we will select the machinery and calculate the price and delivery time.

+38 (066) 354-00-04 Mon–Fri 9:00–18:00

By submitting the form you agree to the privacy policy.