+38 (066) 354-00-04 Mon–Fri 9:00–18:00 75 Zhylianska St, Kyiv, Ukraine

Starmax pellet presses for feed and biomass

Starmax pellet presses: feed presses from 18.5 kW to 2 × 185 kW (0.3–25 t/h) and the BP series for sawdust, wood chips, straw and lucerne, 0.4–2.5 t/h.

Price and configuration
Calculated for your area and conditions
Delivery
Within Ukraine and abroad, with customs clearance
Start-up and service
On-site commissioning and staff training

Description and specifications

Description

A pellet press forces prepared material through a ring die and forms pellets. Starmax makes industrial presses for two purposes: feed presses, and the BP series for biomass and grasses. We supply a press on its own, for an existing plant, or as part of a plant, a mill or a pelleting line.

Feed presses

PressMotorDieCapacityWhere it is used
500F18.5 kW—0.3–0.6 t/hEkostar 500 plant
1000F22 kW—0.5–1 t/hEkostar 1000 plant
24022 kW—1–1.5 t/hEkostar 1500 plant
P350-3737 kW350/98 mm1.5–2 t/hEkostar 2000 plant
P350-7575 kW350 series2.5–3 t/hProstar 3000 plant
PLT420X452 × 45 kW420/142 mm4–6 t/hPROSTAR 5000 mill
5202 × 75 kW520/178 mm9–11 t/hPROSTAR 10000 mill
6602 × 110 kW—14–16 t/hPROSTAR 15000 mill
custom2 × 185 kW900/265 mm20–25 t/hcustom-designed mill

The standard die has 6 mm holes; 4, 8 and 10 mm are also used. Capacity depends on the hole diameter, so the die is chosen for the recipe.

Presses for biomass and grasses

PressMotorRollersCapacity
BP5555 kW30.4–1.2 t/h
BP132132 kW21–2.5 t/h
BP250132 kW2, Ø320 × 200 mm1–1.5 t/h on dried wood

Before pressing, the material is dried to below 15% moisture and finely milled. The manufacturer’s guide figures for the 132 kW press with a 6 mm pellet: lucerne about 2 t/h, sawdust about 1.5 t/h, straw about 1 t/h. Straw is very abrasive: die life on it is roughly a tenth of that on feed.

What is needed besides the press

  • A bin above the press and a feeder with a frequency drive.
  • A conditioner: feed is steam-treated before pressing; the body and paddles are AISI 304.
  • A steam boiler: 200 kg/h for a 2.5–3 t/h plant, 600 kg/h for a 10 t/h mill.
  • A counterflow cooler with a temperature sensor.
  • A crumbler for crumbles and a sieve that returns fines to the press.
  • Compressed air at 6–8 bar.

Construction

The feed presses have a V-belt drive, two rollers, a pressing chamber of AISI 304 stainless steel, overload protection and a magnet at the inlet. Dies are made of X46Cr13 steel. On the BP132 the die runs in both directions of rotation, the transmission is oil-cooled and the roller bearings are lubricated automatically.

Feedtech feed mills
Feed and livestock · Feedtech

Feedtech feed mills

Feed mills are the core business of Feedtech. The company builds both turnkey mills and any of their individual elements: hammer mills, mixers, pelleting lines and dosing units.

Price on request
Starmax PROSTAR feed mills
Feed and livestock · Starmax

Starmax PROSTAR feed mills

Stationary mills from the Turkish manufacturer Starmax produce pelleted feed, crumbles and mash, from tipping raw material out of a lorry to bagging and bulk loading. One mill makes both mash and pellets: a diverter…

Price on request
Starmax mini feed mills for farms
Feed and livestock · Starmax

Starmax mini feed mills for farms

Starmax mini feed mills are for farms that make their own feed, to their own recipe and always fresh. Up to 3 t/h, grinding and mixing take place in one machine, a grinder-mixer, so the plant is compact.

Price on request
Caravaggi mobile feed mills
Feed and livestock · Caravaggi

Caravaggi mobile feed mills

The mobile feed mill from the Italian company Caravaggi lets feed be made right on the farm, from your own raw materials and to your own proportions. The machine travels between farms and sites and needs no building.

Price on request
Request

Request a price for this machine

Describe your task — we will select the machinery and calculate the price and delivery time.

+38 (066) 354-00-04 Mon–Fri 9:00–18:00

By submitting the form you agree to the privacy policy.