+38 (066) 354-00-04 Mon–Fri 9:00–18:00 75 Zhylianska St, Kyiv, Ukraine

Starmax biomass pelleting and pellet production lines

Starmax lines for fuel pellets from sawdust, wood chips, straw and husk, and feed pellets from lucerne, grass and bran: size reduction, drying, pressing, bagging.

Price and configuration
Calculated for your area and conditions
Delivery
Within Ukraine and abroad, with customs clearance
Start-up and service
On-site commissioning and staff training

Description and specifications

Description

Starmax pelleting lines do two jobs: they make fuel pellets from sawdust, wood chips, straw and husk, and feed pellets from lucerne, grass and bran. A line comprises size reduction, drying, fine milling, pressing, cooling, sieving and bagging.

Raw materials and typical lines

Raw materialWhat mattersTypical configuration
Sawdust and wood chipsdry wood goes to the press without drying; wet wood is dried and milled again after drying3 t/h on dried wood: three BP250 presses, cooling, sieving, bagging into 25–50 kg sacks
Strawchopped straw of 5–7 cm is dried from 50% to 25%; long straw is a fire risk in the dryer; pellet up to 10 mmstraw drying at 6 t/h infeed on two drums
Sunflower huskno drying, with steam conditioning6 t/h: 45 kW hammer mill, mixer, conditioner, 2 × 75 kW press
Baled lucernebales are broken by a rotary shredder; drying from 50% to 15%3–4 t/h: two rotary shredders, drying, milling, two presses, filling 500–1,000 kg big bags
Grass and grain: feed pelletscrushed grain is added to the grass fraction4 t/h: shredding, drying, milling, a grain grinder-mixer, two presses, cooling, bagging
Wheat branno drying or grinding, with steam conditioning10 t/h: conditioner, 2 × 160 kW press, cooling, sieving; 6 mm pellet

Presses

PressMotorRollersCapacity
BP5555 kW30.4–1.2 t/h
BP132132 kW21–2.5 t/h
BP250132 kW21–1.5 t/h on dried wood

Where one press is not enough, several are installed in parallel.

Drying the raw material

For pelleting the moisture of the material must be below 15%. Material with up to 50% moisture is dried in a drum dryer; the drum size and thermal power are calculated from the material and the capacity. The heat generator is matched to the customer’s fuel: natural gas, solid fuel or diesel.

How the line works

  • Intake: bales or loose material are fed by a bucket or a belt conveyor.
  • Primary size reduction: a rotary bale shredder or a hammer mill.
  • Drying in a drum dryer.
  • Fine milling in a hammer mill; wood chips are milled again after drying.
  • For feed pellets, dosing and mixing with the grain fraction; bran and husk are steam-treated.
  • Pressing, cooling in a counterflow cooler, and sieving with the fines returned to the press.
  • Bagging into 25–50 kg sacks or big bags, or bulk loading.
Feedtech feed mills
Feed and livestock · Feedtech

Feedtech feed mills

Feed mills are the core business of Feedtech. The company builds both turnkey mills and any of their individual elements: hammer mills, mixers, pelleting lines and dosing units.

Price on request
Starmax PROSTAR feed mills
Feed and livestock · Starmax

Starmax PROSTAR feed mills

Stationary mills from the Turkish manufacturer Starmax produce pelleted feed, crumbles and mash, from tipping raw material out of a lorry to bagging and bulk loading. One mill makes both mash and pellets: a diverter…

Price on request
Cereals Starmax steam flaking lines for grain
Feed and livestock · Starmax

Starmax steam flaking lines for grain

Steam flaking turns grain into feed flakes. The grain is steamed in a tower, flaked between two hardened rollers, then dried and cooled in a tunnel. Steamed flakes have more digestible starch, and there is noticeably…

Price on request
Starmax mini feed mills for farms
Feed and livestock · Starmax

Starmax mini feed mills for farms

Starmax mini feed mills are for farms that make their own feed, to their own recipe and always fresh. Up to 3 t/h, grinding and mixing take place in one machine, a grinder-mixer, so the plant is compact.

Price on request
Request

Request a price for this machine

Describe your task — we will select the machinery and calculate the price and delivery time.

+38 (066) 354-00-04 Mon–Fri 9:00–18:00

By submitting the form you agree to the privacy policy.