+38 (066) 354-00-04 Mon–Fri 9:00–18:00 75 Zhylianska St, Kyiv, Ukraine

Windrow pick-ups by MILLER, made in the USA

Windrow pick-up with a wide working width.

Price and configuration
Calculated for your area and conditions
Delivery
Within Ukraine and abroad, with customs clearance
Start-up and service
On-site commissioning and staff training

Description and specifications

Description

MILLER, part of the Oxbo corporation (USA), offers an innovative approach to harvesting forage crops:

1) The pick-up lifts the grass with spring tines towards itself rather than under itself, which keeps dust and stones out of the forage: special screens drop them if they are picked up. Unwanted trash in forage goes against animal nutrition requirements, so MILLER pick-ups improve forage quality, which in turn raises milk yields and weight gain.

2) A belt conveyor handles the grass very gently, without excessive damage.

3) A wide range of working widths, from 3.66 to 10.14 m.

4) A reliable, strong construction.

5) A tractor of modest power is enough to work with the pick-up.

6) Quick and easy change from field to road mode by self-folding.

7) The conveyor belts can run to the left, to the right, or in both directions at once.

8) All bearings used in the pick-up are of one universal size.

9) The control panel is placed in the tractor cab.

10) Working there and back, the grass can be merged from two parallel windrows into a third between them (model 918), from four into a fifth (models 1416 and 1800), or from six into a seventh (models 330 and 334).

11) These pick-ups considerably raise the efficiency of expensive high-capacity self-propelled forage harvesters and save their working life.

Triple windrow pick-up, models 330 and 334

Transport width2,994 mm / 2,994 mm
Working width9,071 mm / 10,289 mm
Required tractor power135 hp, 1,000 rpm (both models)
Working speed3–19 km/h (both models)
Weight5,976 kg / 6,067 kg
Pick-up width of one unit2,286 mm (both models)
Length6,956 mm / 7,585 mm
Transport height3,277 mm / 3,391 mm
Height with conveyor lowered2,515 mm (both models)
Oil tank242 l (both models)
Main wheels1.5 x 16.1, 10-ply (both models)
Conveyors 3,048 mm wide3 / 1
Conveyors 3,658 mm widenone / 2

Double windrow pick-up, models 1416 and 1800

Transport width4,318 mm / 4,318 mm
Working width9,068 mm / 10,135 mm
Required tractor power100 hp, 1,000 rpm (both models)
Working speed3–19 km/h (both models)
Weight4,332 kg / 4,445 kg
Pick-up width of one unit2,286 mm (both models)
Length5,995 mm (both models)
Transport height4,115 mm / 4,267 mm
Height with conveyor lowered1,753 mm (both models)
Height with conveyor raised4,877 mm / 5,182 mm
Main wheels11L x 15 (both models)
Support wheels16.5 x 6.5-8 (both models)
Distance between centres4,267, 4,572 or 4,878 mm / 5,486 mm

Single windrow pick-up, model 918

Transport width3,658 mm
Working width6,834 mm
Required tractor power50 hp, 540 or 1,000 rpm
Working speed3–19 km/h
Weight1,633 kg
Pick-up width2,896 mm
Length6,096 mm
Height with conveyor lowered2,159 mm
Height with conveyor raised2,768 mm
Main wheels6.70 x 15
Support wheels16.5 x 6.5, 8-ply

Similar machinery

Catalog
Presses and balers →
Straw / Hay Bale collector
Presses and balers

Bale collector

Price on request
Request

Request a price for this machine

Describe your task — we will select the machinery and calculate the price and delivery time.

+38 (066) 354-00-04 Mon–Fri 9:00–18:00

By submitting the form you agree to the privacy policy.