
Harvesters for hull-less and hulled seed pumpkins
Picks up pumpkins from the windrow.
- Price and configuration
- Calculated for your area and conditions
- Delivery
- Within Ukraine and abroad, with customs clearance
- Start-up and service
- On-site commissioning and staff training
Description and specifications
Pumpkin harvester
A pumpkin harvester with seed separation, made in Slovenia.
The harvester is a high-tech machine with a computer control system. It is ideal for pumpkins of any size. The seeds come out clean, with no pumpkin residue.
| Output | 0.8–1 hectare per hour |
| Required tractor power | 90 hp |
| PTO speed | 540 rpm |
| Harvester weight | 4,400 kg |
| Dimensions (L x W x H) | 4,950 x 2,450 x 3,200 mm |
Before machine harvesting, the pumpkins should be gathered into windrows with a so-called pumpkin plough (it resembles a snow plough).
If the field is very weedy, the pumpkins must not end up among the weeds flattened by the plough but lie separately from them. This can be achieved by fitting a mulcher behind the tractor to chop the weeds while windrowing with the plough. The pumpkin harvester then picks the fruit up from the windrow with its pick-up, and a conveyor carries the pumpkins to the crushing unit, where they are broken into small pieces. The pieces enter a rotating screen drum that separates the seeds from the flesh.
An auger carries the seeds to the suction drum, which removes the remaining flesh. The flesh falls back onto the field, while the almost clean seeds go into the seed tank (1,000 l), which is emptied hydraulically.
The main advantage of mechanised pumpkin seed harvesting is high output per unit area with low labour input.
How it works
A pick-up 1,500 mm in diameter and 1,040 mm wide spikes the pumpkin, which then passes onto a wear-resistant conveyor made of several layers of rubber and fabric. The conveyor is driven by a hydraulic motor. The pick-up is not a separate unit but is mounted directly on the machine. It swings out from the transport position and is lowered hydraulically into the working position.
High-capacity suction equipment cleans the seeds of the remaining flesh.
The seeds are then carried by an auger into the tank. The speed of the suction drum is adjusted hydraulically, and a built-in brush keeps the drum clean at all times.
On-board hydraulics
Equipped with a gear pump, an oil tank and solenoid valves. The advantage of on-board hydraulics is that the hydraulic components have their own oil supply.
Valves
Solenoid valves make it comfortable to control the harvester from the tractor cab. They keep the speed constant regardless of the size of the pumpkins.
Inside the seed tank is an auger that feeds the seeds to the unloading auger. The unloading auger extends hydraulically, so unloading the seeds into a trailer or lorry is no problem.
The tilt angle of the harvester drum is adjusted hydraulically.
The computer system monitors all working parameters and, if a fault occurs, warns the operator with a sound and light signal.
TR 1000 pumpkin seed harvester with manual feed
TR 1100 pumpkin seed harvester with manual feed