+38 (066) 354-00-04 Mon–Fri 9:00–18:00 75 Zhylianska St, Kyiv, Ukraine

Road repair machine

Efficient machinery for road repair.

Price and configuration
Calculated for your area and conditions
Delivery
Within Ukraine and abroad, with customs clearance
Start-up and service
On-site commissioning and staff training

Description and specifications

Description

A new-generation road repair machine has to deal with potholes quickly and well, and it has to cut the cost of repair work too.

This self-propelled American-made machine for repairing potholes does the job in just a few minutes (2 to 6, depending on the size and difficulty). One operator is enough: they drive the machine to the site and then control the repair with a joystick, whereas patching a road surface normally takes 5 to 7 people with 2 or 3 machines. The repair machine also occupies only one traffic lane, while road repairs normally close at least 2. A very important advantage is that no separate roller is needed.

The repair goes like this. First a powerful air jet clears all debris, gravel and water out of the hole. The surface of the hole is then coated with a tack-coat emulsion so that the patch bonds better and lasts longer. Finally, using a multi-axis swivelling feed elevator (which extends forwards and backwards by several metres), the operator fills the hole with asphalt mix, levels it with the blade at the front and compacts it with a roller as powerful as the one on an asphalt paver. Patches made by this machine therefore last as well as the road surface itself.

The machine keeps warm asphalt mix warm and heats cold mix to the optimum temperature. It can work in sub-zero temperatures and in pouring rain, and it moves quickly from site to site: its top speed is up to 90 km/h.

Compared with the standard method, which needs several workers and 2–3 machines including a roller, the machine cuts the cost of repairing a square metre of road surface to about a third.

Technical specification

Weight5,818 kg
Wheelbase290 cm
Width254 cm
Height305 cm
Length650 cm
Asphalt hopper capacity5 t
Tack-coat emulsion tank capacity158 l
Asphalt temperature control systemup to 93 °C
Wheelsfront and rear identical, 572 x 210 mm, 295/70R22.5
Engine4.5 l John Deere 4045 HF, EPA Tier 3, 173 hp
Transmissionhydrostatic
Fuel tank capacity209 l

The cab has a heater and air conditioning.

Large illuminated flashing arrows at the rear let drivers see from a distance that road works are under way.

Heat from the exhaust is used economically to keep the asphalt mix at temperature.

Request

Request a price for this machine

Describe your task — we will select the machinery and calculate the price and delivery time.

+38 (066) 354-00-04 Mon–Fri 9:00–18:00

By submitting the form you agree to the privacy policy.