+38 (066) 354-00-04 Mon–Fri 9:00–18:00 75 Zhylianska St, Kyiv, Ukraine

Turf harvester for cutting sod

Cuts strips of turf.

Price and configuration
Calculated for your area and conditions
Delivery
Within Ukraine and abroad, with customs clearance
Start-up and service
On-site commissioning and staff training

Description and specifications

Description

A harvester for cutting strips of turf.

Width of the cut strip: either 406 mm or 457 mm.

Strip length adjustable from 1,143 mm to 2,540 mm.

Required tractor power: over 70 hp.

An economical concept proven over time in many countries. A floating-head design in which the cutting head pivots independently of the conveyor; a fully visible, open construction. The harvester gives a top-quality cut and high speed with extremely low operating costs. The balanced cutting blade produces little noise and vibration. The rolls have even edges and uniform thickness. Electric adjustment of the cutting depth is standard. Extremely durable roller bearings and bushings are used in all moving parts. A unique roll-up system works together with the separated side belts of the conveyor: no sod can pass under the starting tray and remain unrolled, and even the softest sod can be harvested. This patented system is not found on other turf harvesters. The harvester suits any well-known tractor make, with two- or four-wheel drive, and is attached or detached in a few minutes.

The floating cutting head pivots by 15 degrees. The frame with the roller and blade pivots independently of the conveyor frame, which gives an extremely even cut at high speed because the blade follows the shape of the surface. The cutting head is fully visible and easy to reach, and the balanced blade drive, fitted with heavy-duty bearings, is very easy to service.

For automatic fine adjustment of the cutting depth, a button is pressed on the control panel by the driver’s seat or at the stacking position; manual adjustment is also possible. Separated conveyor belts carry the sod upwards. The belts run over stainless steel drums and lift the sod very close to the surface, so young sod is not damaged or broken. The belts are extremely durable.

The roll-up system has a tray between the individual conveyor belts, so no sod is left unrolled. A flexible rubber starting tray protects the roll from breaking, and the extended roll-up system rolls the sod smoothly, precisely and gradually, protecting soft sod. Every roll comes out in the right position. Rubber roll-up sprockets mean easy maintenance, no wear and excellent results.

The cross conveyor is hydraulically driven with speed adjustment for easier stacking. Its belt is smooth so as not to harm the sod and is made of a practically wear-free material. A special pallet carrier can be hitched and unhitched like ordinary farm equipment (optional).

The pallet carrier with stacking platform is attached to the tractor by the three-point linkage and also carries the rear of the harvester. The pallet being stacked sits on forks. The weight is distributed so that most of the pallet’s weight is carried by the tractor and about 30% (with a full pallet) by the harvester’s wheels, so the tractor needs less front ballast and the machine works much better in wet conditions. The pallet is offset behind the tractor so that the stacking area is closer to the main conveyor delivering the rolls, which makes stacking faster and more convenient. The vibration-free platform is comfortable for the stacker, and the pivoting pallet frame is easy to reach with a forklift for loading empty pallets.

Easy attachment to the tractor in a couple of minutes: the harvester hooks onto a mounting designed for the specific tractor model. The mounting frame stays on the tractor when the harvester is detached.

Technical data

Cutting width406 mm (optionally 457 mm)
Strip lengthadjustable from 1,143 mm to 2,540 mm
Capacityup to 1,421 m² per hour, about 3,100 linear metres per hour
Harvester widthapproximately 3,000 mm

Bearings: brass bushings at lightly loaded points, rollers or bearings at heavily loaded pivot points; all can be lubricated

Conveyorfive separated long-life rubber belts on stainless steel rollers
Blade typestandard R&R
Crankshafthardened steel, balanced for shake-free operation

Required tractor: two- or four-wheel drive, 40 hp minimum, with three-point linkage and at least one single-acting hydraulic valve

Optional equipment:

Rotating brush with hydraulically adjustable speed

Polyester coating

Independent hydraulic system including housing, filters, gearbox, pump and electric valve / flow control unit

Cross conveyor for rolls with hydraulically adjustable speed

Automatic steering (depends on the tractor type)

Hydraulic pallet fork lift for a trailer

Similar machinery

Catalog
Harvesters →
Request

Request a price for this machine

Describe your task — we will select the machinery and calculate the price and delivery time.

+38 (066) 354-00-04 Mon–Fri 9:00–18:00

By submitting the form you agree to the privacy policy.